Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: DX Suspension

  1. #11
    Inactive Member revhardracing's Avatar
    Join Date
    December 22nd, 2001
    Posts
    90
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    primer, e-mail me direct if you want to work out something.
    magic wheels, peace.

    ------------------

  2. #12
    Inactive Member primer's Avatar
    Join Date
    January 7th, 2002
    Posts
    24
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Smile

    Thanks Habib, Some very good info.


    ------------------
    1991Honda DX Hatch newbee

  3. #13
    Inactive Member gunnmen01's Avatar
    Join Date
    September 30th, 2001
    Posts
    33
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    where are you getting the springs from???

    ------------------

  4. #14
    Inactive Member primer's Avatar
    Join Date
    January 7th, 2002
    Posts
    24
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I called Progress for some questions then decided to go with them so I hooked a friend up in Saginaw with the local Progress Distributor and ordered through his shop.

    ------------------
    1991Honda DX Hatch newbee

  5. #15
    Inactive Member JohnnyM's Avatar
    Join Date
    May 14th, 2001
    Posts
    177
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    The teg lower and upper control arms will not work since they are different than the civic lower control arms. If you do the teg rear disc conversion you must use the civic lower control arms and only the trailing arms from the integra. I would find an SI lower control arms at the local wrecker and then swap them in if you want the lower bar.



    [This message has been edited by JohnnyM (edited January 09, 2002).]

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •